| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,131 Posts1,056,722 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | Bigbinaz, probably depends on teh type truck you have. Mine is 37 pickup with original chassis. I welded a plate to the inside of chassis from about the cab to front.Then had a local streetrodder weld my crossmember under it and welded the coil spring towers in place with the brackets to attach the A-arms etc. Next i went to the junk yard and for 75 bucks took the front end out from under a 78 mustang II. blasted and cleaned them up, put in new joints and bushings, 85 bucks for chev bolt pattern rotors but still used the stang II calipers. Bolted in the 350/350 with malibu rearend and it drives real good. total cost in the front end,$800 including the fabrication/labor. One thing important was when we welded the rear cross member and the motor mounts we had a "dummy" block and tranny shell to make sure everything fit just right. you can see my truck here at the stovebolt gallery. look under the 36-40 year and under Alvin's...if you have lots of money...go kit...if in no hurry and want to do it all yourself then this is a possiblity....I spent 5 1/2 years on mine  | | |
|
|
| |
