| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,046 Posts1,055,618 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | The kingpin bushings are floating bushings meaning that they are not press fit into the spindles. They can be inserted with finger pressure. It is my understanding that oversize kingpins were made available to deal with the problem of a wallowed out hole in the axle. I don't think the OD of the oversize bushings changed. I don't believe there is an off the shelf cure for wallowed out holes in the spindle assembly. Some would say that is a problem that can result from the floating bushing design. | | |
|
|
| |
