| |
Click on image for the lowdown. 
====
| | |
7 members (GMCJammer51, MickeyP, jmoore, 55shaker, Eisenholtz, lumbersawyer, 1 invisible),
98
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,115 Posts1,056,627 Members48,450 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2007 Posts: 1,038 'Bolter | | 'Bolter Joined: Apr 2007 Posts: 1,038 | On my '50 Chevy COE the passenger side axle spindle is NOT reverse threaded. Regarding the tool I have only seen one on Ebay in the past nine years of searching. A friend made me one with a section of pipe with a socket welded on one end and the other tig welded 6 studs to fit the nut. The real tool also has an extension that fits inside the spindle to better hold it in the proper orientation.
Most people use a punch placed into the slots in the nut. Over time this distorts the slot, especially if someone has had to really punish the punch to get the nut to move.
Kent | | |
|
|
| |
