Fel-Pro isn't ALL bad. I got most of the gaskets that were supposed to be in the kit. The Copper Head Gasket went on very nicely. I should read my website more often. Jeff gave an instruction on how to install them and he recommended Copper Gasket Spray too. I sprayed a coat on both sides, used 4 guide studs and the head went on without incident. With the head on and valves adjusted, its all going great. Thanks everyone for the help!
By the way, there was a thread awhile back, someone was putting on a head gasket that blocked holes in the block. I was VERY nervous about this. The Fel-Pro Copper gasket did NOT block any holes.
Last edited by Deve; 06/14/2015 3:14 PM.
