| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,172 Posts1,057,108 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2006 Posts: 9,671 'Bolter | | 'Bolter Joined: Oct 2006 Posts: 9,671 | That's why they call that cast piece a bearing retainer Fred.
That pinion is supported in the back by the small bearing and
in the front by the double row tapered bearing. The bearings
are sandwiched together by the 10,000ft.lb torque on the nut for
the yoke. The whole works is held in the carrier by the
retainer.
The depths of engagement for the pinion is set by the
shims behind the bearing races.
Denny G.
Last edited by Denny Graham; 03/06/2014 4:59 AM.
Denny G
Sandwich, IL
| | |
|
|
| |
