| |
Click on image for the lowdown. 
====
| | |
7 members (walter74, baldeagle, Wooley, Sjm, moparguy, Jman, SmalltownTRKGuy),
344
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,166 Posts1,057,092 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | When I removed my pinion bearing retainer and yoke, I could flop the shaft around as the outside race was not in compression anymore. I don't understand why this is possible. As I read in the manual, the whole pinion assembly is pressed into the case and therefore the outside race should be holding the inside inner race in place. Am I missing something here? Do I have a problem? | | |
|
|
| |
