| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,010 Posts1,055,251 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | Threads Created | All Posts
All Posts Made By Crabbyappleton
| | Re: '50 Chevy - Difficult to Restart? | Engine Shop | 12/03/2012 10:44 PM | | Re: priming oil pump | Engine Shop | 12/01/2012 6:25 PM | | Re: Running temperature question | Engine Shop | 08/10/2012 10:06 AM | | Re: 235 Starting Woes | Engine Shop | 06/27/2012 4:08 PM | | Re: It's ALIVE! My first rebuild, 235 first start! | Engine Shop | 06/04/2012 12:55 AM | | Re: Non-deterget vs detergent which should I choose? | Engine Shop | 05/01/2012 8:34 PM | | Re: Hydraulic Lifter with Solid Cam? | Engine Shop | 04/30/2012 3:54 AM | | Re: Hydraulic Lifter with Solid Cam? | Engine Shop | 04/30/2012 3:48 AM | | Re: Hydraulic Lifter with Solid Cam? | Engine Shop | 04/30/2012 1:29 AM | | Re: Hydraulic Lifter with Solid Cam? | Engine Shop | 04/29/2012 10:39 PM | | Re: 1957 6 cyl not getting proper gas mileage | Engine Shop | 04/09/2012 5:23 AM | | Re: So, new rings, and conrod bearings, assembly lube? | Engine Shop | 03/12/2012 3:49 AM | | Re: oil | Engine Shop | 03/31/2011 6:09 PM | | Re: Blue smoke on downstroke | Engine Shop | 03/29/2011 10:11 AM | | Re: Detroit Diesel 6V92TA | Engine Shop | 02/28/2011 3:51 AM | | Re: Modern Oil in a Classic Engine | Engine Shop | 02/23/2011 2:55 AM | | Re: 216 engine oil questions | Engine Shop | 01/21/2011 2:52 AM | | Re: 216 engine oil questions | Engine Shop | 01/20/2011 9:36 PM | | Re: tandem axle power divider | Big Bolts | 01/18/2011 12:37 AM | | tandem axle power divider | Big Bolts | 01/17/2011 12:01 PM | | Spark plug gap | Engine Shop | 12/27/2010 9:38 PM | | Re: Lubin’ that Needle Bearing Universal Joint? | Engine Shop | 12/18/2010 12:51 AM | | Re: rebuild startup | Engine Shop | 12/18/2010 12:44 AM | | Re: 2 rings / one groove? | Engine Shop | 08/24/2010 1:09 AM | | Re: Low HP 350, what are my options? | Engine Shop | 08/22/2010 4:40 AM | | Re: Break-in oil (flat tappet) | Engine Shop | 08/17/2010 11:27 PM | | Re: Car running like crap after the cold weather | Engine Shop | 01/11/2010 2:17 PM | | Re: synthetic oil in an old truck? | Engine Shop | 12/23/2009 10:16 PM | | Re: Trademaster, Taskmaster, or Workmaster? | Engine Shop | 12/16/2009 9:28 AM | | Re: Trademaster, Taskmaster, or Workmaster? | Engine Shop | 12/13/2009 11:04 PM | | Re: (Thoughts) updating driveline on 216.... | Engine Shop | 09/25/2009 3:18 AM | | Re: hard starting when warm | Engine Shop | 09/22/2009 6:01 PM | | Re: 1965 c10 - turns over, not starting | Engine Shop | 09/20/2009 1:21 AM | | Re: Boring a 235 | Engine Shop | 09/17/2009 10:25 PM | | Re: 1960 235 cu. in. | Engine Shop | 09/07/2009 3:03 AM | | Re: What V-8 Engine can fit a 1960 Chevy? | Engine Shop | 09/03/2009 1:01 AM | | Re: Clutch chatter | Engine Shop | 08/23/2009 3:35 AM | | Re: Adjusting valves on 283...again?? | Engine Shop | 08/21/2009 7:22 AM | | Re: Weld, braze or jb | Engine Shop | 08/21/2009 3:09 AM | | Re: Weld, braze or jb | Engine Shop | 08/21/2009 1:58 AM | |
|
| |
