| |
Click on image for the lowdown. 
====
| | |
2 members (baldeagle, Ponchogl),
69
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,014 Posts1,055,328 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2004 Posts: 29,746 Kettle Custodian (pot stirrer) | | Kettle Custodian (pot stirrer) Joined: Feb 2004 Posts: 29,746 | Good article- - - -thanks! When I was stationed in Okinawa a local machine shop did a lot of Babbit work, re-pouring various types pillow blocks and other cast-in-place bearings. I used to hang around and watch when I could get time off from fixing the electronics on B-52's. I'm doing a rebuild on a 1928 Model A soon, and it's possible I might have to re-pour the main bearings. A machine shop near my farm has a portable line bore machine so I'll make a mandrel a few thousandths undersize, rough-pour the bearings, and get them to do the finish boring. That should be a lot less time-consuming than scrape-fitting all the bearings!
Jerry
"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
| | | | | Joined: Apr 2010 Posts: 160 'Bolter | | 'Bolter Joined: Apr 2010 Posts: 160 | When my dad poured a brng. he would wrap the mandrel with one layer of newspaper then spiral wrap that with string. This would cast a grease groove in the brng. And no the paper wouldn't burn. | | | | | Joined: Sep 2008 Posts: 872 Shop Shark | | Shop Shark Joined: Sep 2008 Posts: 872 | That's a great idea. I bet using a wire would work and you could control the depth by using different diameter of wire. | | |
|
|
| |
