| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
3 members (jay d, 2 invisible),
54
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,009 Posts1,055,292 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2013 Posts: 25 New Guy | | New Guy Joined: Jan 2013 Posts: 25 | Can anyone tell me if the 235 splash feed Harmonic ballancer will fit the pressure fed 235 engine as I've just fitted the early waterpump to my 1956 blueflame and
I think it may spin my pump to fast the diameter of my ballancer is 7 1/2 inches | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 |
Yes, low-pressure 216/235 and high pressure 235/261 harmonic balancers will fit on any 216/235/261 crankshafts.
| | | | | Joined: Jan 2013 Posts: 25 New Guy | | New Guy Joined: Jan 2013 Posts: 25 | thankyou TC for the information
Regards Chrislon | | | | | Joined: Jan 2013 Posts: 25 New Guy | | New Guy Joined: Jan 2013 Posts: 25 | I'm told I need a 53 or 54 6cyl car harmonic balancer with the thin pulley so I don,t over speed my water pump can help me locate one
Regards Chris | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | The pulleys for the narrow fan belts (3/8") were used from 1953 onwards on 216/235/261 engines. On truck engines from 1954 onwards, the diameter was 7.25". It looks like a 3/8" groove 6 1/8" (smaller diameter) pulley was used on 1953 car & truck engines. There were some 7.5" double groove pulleys for cars (1953 and later) - they would e close enough in diameter. From 1937-52 the 216 harmonic balancer was a little over 6" in diameter. The 1941-1952 235 harmonic balancer (5/8"groove) was 7.25" in diameter. Is that sufficiently complicated and confusing? | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | I'm told I need a 53 or 54 6cyl car harmonic balancer with the thin pulley so I don,t over speed my water pump can help me locate one
Regards Chris Place a Parts Wanted ad in the Swap Meet (state the groove width and diameter that you want). | | | | | Joined: Feb 2012 Posts: 2 New Guy | | New Guy Joined: Feb 2012 Posts: 2 | If I'm not to late. I just purchased a used one from Langdon's Stovebolt Engine site. Great people and very knowledgable. reat price too. | | | | | Joined: Feb 2012 Posts: 2 New Guy | | New Guy Joined: Feb 2012 Posts: 2 | Hope I'm not to late to post. I just purchased a harmonic balancer 3/8 belt from Tom Langdon at Langdon's Stovebolt Engine site. e is very knowledgeable and helpful. Prices are great too. Hope this helps. | | | | | Joined: Oct 2002 Posts: 4,066 Bolter | | Bolter Joined: Oct 2002 Posts: 4,066 | I bought one from Tom yrs ago... good guy ..
Redryder pixMy HotrodA veteran - whether active duty, retired, national guard, or reserve - is someone who, at one point in his or her life, wrote a blank check made payable to The 'United States of America', for an amount of "up to and including my life."I am fighting cancer and I am winning the fight | Pain is part of life; misery is an option. | | |
|
|
| |
