| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,035 Posts1,055,446 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2013 Posts: 59 Wrench Fetcher | | Wrench Fetcher Joined: Aug 2013 Posts: 59 | I just got a 1965 GMC step side long bed V6 305 4 speed on the floor motor is stuck 8 lug rear right brake hub is locked up what is a good way to try to get the motor free I have remover the spark plugs and filled with diesel fuel I have tried to turn the engine over by using a socket on the front pulley on the motor but can not move I will let it set another week to see if it frees up there are two flat big straight head flat screws on the back brake drum do these have to come out before I try to take the brake drum off
Thanks for any help
Bob
Bob May
| | | | | Joined: Oct 2002 Posts: 4,066 Bolter | | Bolter Joined: Oct 2002 Posts: 4,066 | you might try the general forum or one dealing with engine or brakes... just a tip.............welcome to the bolt
Redryder pixMy HotrodA veteran - whether active duty, retired, national guard, or reserve - is someone who, at one point in his or her life, wrote a blank check made payable to The 'United States of America', for an amount of "up to and including my life."I am fighting cancer and I am winning the fight | Pain is part of life; misery is an option. | | | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | Bob, welcome to the Stovebolt Page. Best old Chevy forums on the entire world wide web.
Sounds like you have a nice project going there. As joker pointed out post your questions in the best forum as not everyone visits here in the Welcome Centre.
Good luck. There is lots of knowledge here and the guys and gals will help. Just let us know how we can. | | | | | Joined: Nov 2004 Posts: 2,400 Former Workshop Owner | | Former Workshop Owner Joined: Nov 2004 Posts: 2,400 | Hello Bob, one way to break the motor loose is to put the transmission in 3rd or 4th gear and rock it back and forth. I prefer to use penetrating oil instead of diesel as that's what it is designed to do (penetrate).
If I were you, I would fill the cylinders with penetrating oil at least a few days (or even a week) before rocking the truck.
Welcome to the "Bolt"
Good Luck
John
~ J Lucas 2006 GMC Envoy 4.2 I6 2023 Ram 2500/Cumins 6.7 I6 2010 Jeep Grand Cherokee (Wife’s) 2002 Silverado 2500 Gas 6.0 1941 Chevy 1/2-Ton 1942 Chevy 1.5-Ton SWBIn the Gallery My Flicker Photos! | | |
|
|
| |
