| |
BUSY BOLTERS Are you one?  The Shop Area
continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.
| | Click on image for the lowdown. 
====
| | |
0 members (),
433
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics126,777 Posts1,039,270 Members48,100 | | Most Online2,175
Jul 21st, 2025 | | | | Joined: Dec 2011 Posts: 55 'Bolter | | 'Bolter Joined: Dec 2011 Posts: 55 | What would be the better option buy a after market chrome bumper. Buy a after market stainless bumper or just have my bumper rechromed. This will be going on a 51 3100. What are the pros and Cons to each one. Let me know thanks | | | | | | OLTrucks Unregistered | | OLTrucks Unregistered | After market chrome, Poor thin most only two process plating. will bend easily compared to original. Least cost.
After market stainless, Light scratches can be removed and still look good, will bend easily compared to original. not quite the shine of chrome, Lower cost to re chroming.
Re chromed original, highest cost but highest quality (if done right)best appearance.
Last edited by OLTrucks; 07/21/2012 2:18 PM.
| | | | | Joined: Aug 2010 Posts: 127 Shop Shark | | Shop Shark Joined: Aug 2010 Posts: 127 | of all the repop bumpers ive seen, id rather paint my oe chrome bumper then have one of those thin crappy chinese chrome bumpers. I havent actually seen a stainless one in person, but i have to assume its not much better, but at least it cant flake in a few months. | | | | | Joined: Sep 2001 Posts: 29,262 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,262 | I'd use a stainless steel bumper if they had one for 1954 rear, and as long as the gauge was right. I have chrome Chinese front and rear 1954 bumpers that have a gauge close to the original chrome and painted bumpers. I do not yet know how well they will last (but, if the chrome does not last, I will blame it on the American importer's poor specifications and/or poor quality assurance).
| | | | | Joined: Dec 2011 Posts: 55 'Bolter | | 'Bolter Joined: Dec 2011 Posts: 55 | What gauge is the oe bumper and how do I tell if mine is oe or after market. I assume my bumper had been rechromed at one time cause its nickled in the back the person I bought it from had a lot of chrome done on it at one time axle, leaf springs ect. | | | | | Joined: Nov 2002 Posts: 1,002 Shop Shark | | Shop Shark Joined: Nov 2002 Posts: 1,002 | FYI, there various grades of stainless steel, some will rust, there is enough iron in it for many tiny specks of rust. The typical grades used are 303 and 304, 303 will rust, 304 will not.
Larry
I don't own a vehicle that isn't old enough to drink.
| | | | | Joined: Oct 2006 Posts: 4,983 Master Gabster | | Master Gabster Joined: Oct 2006 Posts: 4,983 | FYI, there various grades of stainless steel, some will rust, there is enough iron in it for many tiny specks of rust. The typical grades used are 303 and 304, 303 will rust, 304 will not.
Larry My vote is for the stainless 304!
~Jim
| | | | | Joined: Dec 2011 Posts: 55 'Bolter | | 'Bolter Joined: Dec 2011 Posts: 55 | | | | | | Joined: Jul 2012 Posts: 2 New Guy | | New Guy Joined: Jul 2012 Posts: 2 | | | | | | Joined: Aug 2010 Posts: 127 Shop Shark | | Shop Shark Joined: Aug 2010 Posts: 127 | what does that have to do with stovebolts? its a tubular jeep bumper. | | | | | Joined: Oct 2006 Posts: 4,983 Master Gabster | | Master Gabster Joined: Oct 2006 Posts: 4,983 | I wouldn't look to China for one.
~Jim
| | |
|
|
| |
