| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,132 Posts1,056,383 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2010 Posts: 7 New Guy | | New Guy Joined: Nov 2010 Posts: 7 | A couple of weeks ago I recieved a letter from city code enforecement stating I needed to move my old truck. So, I wheeled it into the garage with the help of a friend and now I can't keep my hands off of it. To the best of my knowledge it is a 1937 Chevy 3/4 ton. I ran the data plate I found on the passenger side corner of the firewall through the vin buster. It came from a ranch here in Wyoming so there is an explanation as to why I have a Chevy cab and frame along with a 37' GMC grill/radiator housing and hood. Another possible ranch mod I noticed are the tabs welded to the frame above the overload springs for the rear axle. I am not sure if the lights on top of the cab are or were supposed to be there either. Any info anybody may have would surely and greatly be appreciated. Thanks ahead of time.
Last edited by Peggy M; 04/24/2025 10:58 PM.
| | | | | Joined: Nov 2010 Posts: 7 New Guy | | New Guy Joined: Nov 2010 Posts: 7 | I don't intend to restore the truck nor do I plan on turning it into a rat rod either. A few of the things I have planned for it are listed as follows. I recently picked up a chevy 350 4 bolt main which I have stripped down for a rebuild. I intend to carb it with amybe a change to the cam and pistons. I also would like to run a standard transmission. I can have a ten bolt rear if I want to pick it up but I don,t necessarily know the end goal of the engine and transmission. Since the bed was pretty much non existant I have drawn up a few plans to make a wood stake bed for it.
| | | | | Joined: Sep 2010 Posts: 1,708 back yard wrench turner | | back yard wrench turner Joined: Sep 2010 Posts: 1,708 | Your truck looks very much like my '38 1 ton. Nice!!
Wayne1938 1-Ton Farm TruckStovebolt Gallery Forums1989 Silverado 1996 Mustang GT convertible When I die, I hope she doesn't sell everything for what I told her I paid for it! | | | | | Joined: Nov 2010 Posts: 7 New Guy | | New Guy Joined: Nov 2010 Posts: 7 | If anybody needs or would want any of the drivetrain and suspension components let me know and we can arrange something.
| | | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | ...its nice of you to offer the parts rather than just scrap them. I"m sure someone could use them.
I'd like to suggest you post it in the FREEBIES forum in the Swap Meet section. Lots and lots more people will see your nice offer thare.
| | |
|
|
| |
