| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,076 Posts1,055,924 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2006 Posts: 80 Wrench Fetcher | | Wrench Fetcher Joined: Jun 2006 Posts: 80 | I haven't been on here in a while, been busy with kids and playing with my Jeep project a lot. I always try to start up my '51 and let it run for a few minutes every month or so in the garage. A couple weeks ago I had it running and then noticed steam coming from the manifold and all around the carb. Gas was leaking through the carb gaskets.
I shut it down as fast as I could. Pulled the carb off and took it apart. The gaskets were pretty brittle. I went straight to Stovebolt.com and found a link to Mikes carburetor parts.com. Within a couple minutes I found the right kit and had it ordered for just under $20 shipped.
A couple days later I received the kit in the mail and got it installed.
Now its running nice and smooth again in the back of the garage, I just need to finish the truck and actually drive it on the road!
| | | | | Joined: Aug 2005 Posts: 341 'Bolter | | 'Bolter Joined: Aug 2005 Posts: 341 | Sounds like Mike provides great service...good to hear.
Is that a Rochester carb?
Allan
-----
1951 GMC 1/2-ton
Two 1953 Chevy 3100 5-window
| | | | | Joined: Jun 2006 Posts: 80 Wrench Fetcher | | Wrench Fetcher Joined: Jun 2006 Posts: 80 | Yes it is the Rochester B Carburetor.
This is my first experience with Mikes Carburetor parts but I was really happy with the service. | | |
|
|
| |
