| |
BUSY BOLTERS Are you one?  The Shop Area
continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.
| | Click on image for the lowdown. 
====
| | | Forums66 Topics126,777 Posts1,039,270 Members48,100 | | Most Online2,175
Jul 21st, 2025 | | | | Joined: Apr 2010 Posts: 27 New Guy | | New Guy Joined: Apr 2010 Posts: 27 | I put a new harness in my '49 and now want install my heater switch and wire it to the heater motor (6V). I need to know wire guage to use and the correct terminal from which to get the power for the heater. The switch terminals are marked B and M. I assume M means it's the motor terminal. | | | | | Joined: Sep 2001 Posts: 29,262 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,262 |
The installation manual says to get power from the dead terminal on the ignition switch (dead when the ignition key/switch is in the Off position).
If you have the original heater-motor switch. Facing the front of the switch, the power-in goes on the left terminal and the power-to-motor goes on the right terminal (the terminal closer to the heater when the switch is mounted under the dash).
| | | | | Joined: Apr 2010 Posts: 27 New Guy | | New Guy Joined: Apr 2010 Posts: 27 | Thanks. What about wire guage and fuse size? | | | | | Joined: Sep 2009 Posts: 433 'Bolter | | 'Bolter Joined: Sep 2009 Posts: 433 | SPL this Link should help ...
1954 Chevy 3104 3 Window Hydra-Matic in my family for over 60 Years
Once in a while you get shown the light in the strangest of places if you look at it right... "Scarlet Begonias" Grateful Dead 1974
| | |
|
|
| |
