| |
Click on image for the lowdown. 
====
| | |
1 members (SandraD),
56
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,021 Posts1,055,355 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#73235 02/14/2007 4:23 PM | Joined: Feb 2007 Posts: 34 Apprentice | | Apprentice Joined: Feb 2007 Posts: 34 | Hey guys i realize that the throttle is all linkage to the carb, but whenever you are driving my 65 it sticks and idles real high. You have to reach down and pull the gas pedal up a little and it will idle down. What do i need to look at.thanks | | |
#73236 02/14/2007 4:35 PM | Joined: May 2005 Posts: 1,624 Shop Shark | | Shop Shark Joined: May 2005 Posts: 1,624 | You might want to think about/do isolate the problem. Is it your carb. or is it your linkage. Disconnect your linkage from the carb at the carb. Cycle the carb. with you hand and check for binding. If that checks OK then your linkage must be the problem. Hold the carb. end of the linkage with a silght amount of pressure the have a buddy operate the gas pedal. any binding or snagging? Check your return springs aslo. Broken or weak? It should be easy to isolate and fix. Godd luck.
Six volt guy living in a twelve volt world
| | |
#73237 02/14/2007 4:43 PM | Joined: Feb 2007 Posts: 34 Apprentice | | Apprentice Joined: Feb 2007 Posts: 34 | hey man thanks for the info. We just rebuilt the carb and checked it, but i drove it to work yesterday and it started doing it again so i will do some more looking. | | |
|
|
| |
