The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (Otto Skorzeny, MickeyP, Wally / Montana, Bill Hanlon), 138 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,052
Posts1,055,729
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
Joined: Jun 2008
Posts: 1,644
S
'Bolter
'Bolter
S Offline
Joined: Jun 2008
Posts: 1,644
My trucks cigarette lighter socket does not have any wires attached to it. Can someone tell me how to hook it up so it will work correctly? How many wires and where do they attach to for power?

Thanks,

Spot


Chuck
1950 Chevy 1/2 ton (all original)
1951 Chevy 1/2 ton (future streetrod)
1941 Chevy coupe
1938 Chevy coupe streetrod
Joined: Apr 2010
Posts: 160
R
'Bolter
'Bolter
R Offline
Joined: Apr 2010
Posts: 160


You only need one wire,unless it has a light. The wire plugs on the center pin of the lighter and goes to any source for batt voltage.It grounds thru the socket to the dash.

Joined: Mar 2010
Posts: 22
O
New Guy
New Guy
O Offline
Joined: Mar 2010
Posts: 22
Not sure which truck this is for but my '64 has a spade on the fuse box (lower left side...mine is labled for this purpose) to power the cigarette lighter. I just made a new wire harness for mine as my old cigarette lighter wire was somehow spliced into the original harness. I had an old plastic connector (looks like original) that I put a new female spade connector end into...soldered wire to it and on the other end I solder a small loop connector that will fit over the screw on the back of the lighter.


1964 Chevy C20
Joined: Sep 2001
Posts: 29,269
Bubba - Curmudgeon
Bubba - Curmudgeon
Joined: Sep 2001
Posts: 29,269

retired wrench's instruction will work fine.

If you have the original-style illuminated lighter, it would be wired as described in this 1951 accessory installation manual. The lighter lamp wire to the tail-lamp terminal on the light switch, and the element/case wire to a terminal on the rear of the light switch.

Joined: Jun 2008
Posts: 1,644
S
'Bolter
'Bolter
S Offline
Joined: Jun 2008
Posts: 1,644
Thanks everyone! And Tim thanks for the link to the installation manual and diagrams.

I will hook it up this weekend!

Thanks again,

Spot


Chuck
1950 Chevy 1/2 ton (all original)
1951 Chevy 1/2 ton (future streetrod)
1941 Chevy coupe
1938 Chevy coupe streetrod
Joined: Jul 2014
Posts: 27
M
Wrench Fetcher
Wrench Fetcher
M Offline
Joined: Jul 2014
Posts: 27
Can anyone suggest a wire connector that would be suitable to attach to the center pin of this new 12v lighter( looks like the pin is a threaded rod)?

New lighter is for a 53 Chevy P/U

Lighter:



and

https://www.classicparts.com/1947-53-Cigarette-Lighter-Assembly-12v/productinfo/36%2D508/#prettyPhoto[gallery]%20nofollow/0/

Joined: Apr 2016
Posts: 1,042
M
'Bolter
'Bolter
M Offline
Joined: Apr 2016
Posts: 1,042
I used a small round crimp on connector, nut washer and lock washer. Put some shrink wrap tape on it and make sure it won't ground. It gets hot down there. I don't know if that's the right answer but mine worked for a few decades.


Old enough to know better, too young to resist.
Joined: Jul 2008
Posts: 1,321
H
'Bolter
'Bolter
H Offline
Joined: Jul 2008
Posts: 1,321
You can use a Bullet Connector available at any hardware or auto parts store.
Harold

Last edited by Harold46; 08/27/2018 3:57 AM.

Harold
Is a restoration ever finished?
Joined: Oct 2006
Posts: 9,671
D
'Bolter
'Bolter
D Offline
Joined: Oct 2006
Posts: 9,671
Just an add on to this lighter thread. I've seen negative comment posted in the past referring to the
lighters as just decoration or obsolete objects now that most sane people of average intelligence
don't smoke anymore.
But......they are handy obviously for powering up those modern devices like phone chargers and GPS.
I've kept 'Old Blue', my '50 stock right down to the original 6v system and found that many of those
can be powered up from a 6v power source. I'm presently using a TomTom GPS in Old Blue with
the original 12v car charger that it came with and it works just fine.
DG


Denny G
Sandwich, IL
Joined: Jan 2010
Posts: 4,263
D
Shop Shark
Shop Shark
D Offline
Joined: Jan 2010
Posts: 4,263

Joined: Jul 2014
Posts: 27
M
Wrench Fetcher
Wrench Fetcher
M Offline
Joined: Jul 2014
Posts: 27
Thank you all for the suggestions!


Moderated by  Jon G, Rusty Rod 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0