| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
8 members (Donald Colaluca, 55shaker, TexasA&M48Truck, baldeagle, JW51, Bill Hanlon, Jay R, 1 invisible),
32
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,004 Posts1,055,252 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2008 Posts: 95 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2008 Posts: 95 | Will a 54' steering wheel fit a 51'column with out a lot of trouble? Thanks | | | | | Joined: Feb 2008 Posts: 202 Shop Shark | | Shop Shark Joined: Feb 2008 Posts: 202 | Hi, jimmy1 , On my 1/2 ton 49 I used a 54 wheel for a few years because when my dad purchased the truck in 74 it had a car steering wheel about 2" or 3" smaller diameter, it made it VERY Heavy to steer.( The horn button will also work.) I now have a reproduction steering wheel on the truck. The inner steering shaft is multi splined so when you change the wheel try to have the front wheels straight. It may take a few tries.
Keep the 216's running. 1949 1/2 ton model #1314 (US 3104) Brian
| | |
|
|
| |
