| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,026 Posts1,055,408 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#63118 07/17/2006 6:08 PM | Joined: Aug 2005 Posts: 424 Shop Shark | | Shop Shark Joined: Aug 2005 Posts: 424 | I have '58 chevy V8 (actually I'm doing a conversion from a 235-6 to a 283 using original type mounts, bellhousing etc.) Does anyone know what year flywheels will work with this application? I want to make sure it will work with my bellhousing mounted starter. Also, I'm looking for a flywheel for 10" or 11" clutch if anybody has a good one for sale that will work with my application.
My other question is about balancing. If I pick up a flywheel to use on my 283, what should be done as far as balancing? | | |
#63119 07/17/2006 6:45 PM | Joined: Jul 2004 Posts: 5,708 'Bolter | | 'Bolter Joined: Jul 2004 Posts: 5,708 | Old Gold,
In regards to the flywheel balance question, I was under the impression that each and every flywheel was balanced to itself. If you find a flywheel that fits your application, bolt it on and it should be fine.
I have seen race motor cranks balanced with the flywheel (and maybe clutch too) attached, but I don't think this is necessary for everyday use.
Stuart
Stuart | | |
#63120 07/17/2006 8:05 PM | Joined: Feb 2002 Posts: 12,029 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Feb 2002 Posts: 12,029 | about any standard trans smallblock flywheel from 55 on that takes an 11" clutch [truck] will work - there's a car bellhouse and flywheel that's smaller and mount the starter different, and that's for a 10"
for the balance, as above - if you get it surfaced at a machine shop they'll check the balance, otherwise it's not a worry
Bill | | |
|
|
| |
