The Stovebolt Site Forums The Shop Area General Truck Talk cooling fan an shroud combo 2500cfm min

dose any body know who makes the most durable shroud and fan i need it to be a pusher iam running stock rad in my truck from a ton &1/2 its a 3 or 4 core it runs 190 on highway runs about 210 idling have not let set runnig to see thust ho high it will go thanks ball48pu photobucket.com-ball48pu

NO shroud is needed w/ a pusher fan
you can make a shroud for a puller [only] fan using cardboard as a templete, then pop-rivit , weld, or bolt together and afix it to your rig

i have a 2100cfm pusher fan and a 2500 will be loud !!
I use two relays to power my pusher fan.

http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=0732700-R1-008-2A.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=4495365-R1-006-1A_1.jpg ... not much room for a fan on my rig.
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=0732700-R1-040-18A.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=2650080-R2-014-5A.jpg ... a good ground
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=0732700-R1-016-6A.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=2650080-R2-026-11A.jpg

nice clean looking truck u got there u spent a lot of time with it , i only 2inches between radiator and water pump can not put fan blade on it i only have 7inches from center of pump to lower rad hose have thought of biulding shrod for the front of radiator but i think i will have to punch lovers in bottom of shrod for highway air flow thanks photobucket.com-ball48pu