The Stovebolt Site Forums The Shop Area General Truck Talk Cab Shims 51 GMC 1/2 ton

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (Wayne67vert, Otto Skorzeny, Dusty53), 135 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,147

Posts1,056,798

Members48,454

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Cab Shims 51 GMC 1/2 ton #561483 08/02/2009 11:23 PM
Joined: Sep 2008 Posts: 39 Shelton Wa 5 51 GMC 100 'Bolter
51 GMC 100 'Bolter 5 Joined: Sep 2008 Posts: 39 Shelton Wa	Are the cab shims for the rear shackel made of metal or rubber to maintain the 3/4" from the cab floor to the frame?? I am going nowhere fast and it's not taking me long to get there !!!!

Re: Cab Shims 51 GMC 1/2 ton 51 GMC 100 #561506 08/03/2009 12:42 AM
Joined: Feb 2006 Posts: 649 Yakima, Wa. Y Yakimabowtie 'Bolter
Yakimabowtie 'Bolter Y Joined: Feb 2006 Posts: 649 Yakima, Wa.	Metal

Re: Cab Shims 51 GMC 1/2 ton Yakimabowtie #561522 08/03/2009 1:41 AM
Joined: Sep 2008 Posts: 39 Shelton Wa 5 51 GMC 100 'Bolter
51 GMC 100 'Bolter 5 Joined: Sep 2008 Posts: 39 Shelton Wa	Thanks, Last edited by cletis; 08/03/2009 2:07 AM. Reason: deleted off topic content I am going nowhere fast and it's not taking me long to get there !!!!

Re: Cab Shims 51 GMC 1/2 ton 51 GMC 100 #561824 08/04/2009 12:56 AM
Joined: Dec 2006 Posts: 97 Mena , Arkansas B bowtiedaddy Wrench Fetcher
bowtiedaddy Wrench Fetcher B Joined: Dec 2006 Posts: 97 Mena , Arkansas	i would thank a cab shim would need both metal and rubber my 55 has ..other wise it's metal on metal. Never take a sleeping pill and a laxative at the time.[/i] 1955 Chevy 3100 In the Stovebolt Gallery More pix on Photobucket

Re: Cab Shims 51 GMC 1/2 ton Denny Graham #562018 08/04/2009 2:43 PM
Joined: Sep 2006 Posts: 3,596 Salt Lake City, Utah B Brad Allen 'Bolter
Brad Allen 'Bolter B Joined: Sep 2006 Posts: 3,596 Salt Lake City, Utah	Look at this picture of a complete set I just sold on Ebay it had 4 factory shims on the shackles for the truck, 2 left cab, 2 right frame it also mentions them in the assembly manual. My own 3600 had two one on the left under cab, one on the right under the frame. I have parted nine AD trucks this year and where there were shackles they all had at least one shim in them. http://community.webshots.com/photo/2379203940102454676qNTFMD Last edited by Brad Allen; 08/04/2009 2:51 PM. 1950 Chevrolet 3/4-Ton 3600 More pictures on Flickr

Re: Cab Shims 51 GMC 1/2 ton Brad Allen #562069 08/04/2009 6:31 PM
Joined: Oct 2006 Posts: 9,671 Sandwich, IL D Denny Graham 'Bolter
Denny Graham 'Bolter D Joined: Oct 2006 Posts: 9,671 Sandwich, IL	Pulled out of that one Brad, I just looked in the book and I see what he was looking for, my mistake. DG Denny G Sandwich, IL

Re: Cab Shims 51 GMC 1/2 ton Brad Allen #562159 08/05/2009 1:26 AM
Joined: Sep 2008 Posts: 39 Shelton Wa 5 51 GMC 100 'Bolter
51 GMC 100 'Bolter 5 Joined: Sep 2008 Posts: 39 Shelton Wa	How thick are the shims??? I am going nowhere fast and it's not taking me long to get there !!!!

Re: Cab Shims 51 GMC 1/2 ton 51 GMC 100 #562287 08/05/2009 2:06 PM
Joined: Sep 2006 Posts: 3,596 Salt Lake City, Utah B Brad Allen 'Bolter
Brad Allen 'Bolter B Joined: Sep 2006 Posts: 3,596 Salt Lake City, Utah	I will put a sheet metal gauge on them tonight and check them. I have a few extras I have accumulated laying around. 1950 Chevrolet 3/4-Ton 3600 More pictures on Flickr

Re: Cab Shims 51 GMC 1/2 ton Brad Allen #562333 08/05/2009 6:45 PM
Joined: Sep 2008 Posts: 39 Shelton Wa 5 51 GMC 100 'Bolter
51 GMC 100 'Bolter 5 Joined: Sep 2008 Posts: 39 Shelton Wa	Great thanks!! I am going nowhere fast and it's not taking me long to get there !!!!

Re: Cab Shims 51 GMC 1/2 ton 51 GMC 100 #562597 08/06/2009 3:47 PM
Joined: Sep 2006 Posts: 3,596 Salt Lake City, Utah B Brad Allen 'Bolter
Brad Allen 'Bolter B Joined: Sep 2006 Posts: 3,596 Salt Lake City, Utah	Ok I put the sheet metal gauge on these (I have four spares) they all check the same dimensions. They are 16 gauge or .0625 thick. http://community.webshots.com/photo/2379203940102454676qNTFMD 1950 Chevrolet 3/4-Ton 3600 More pictures on Flickr

Re: Cab Shims 51 GMC 1/2 ton Brad Allen #562603 08/06/2009 4:34 PM
Joined: Sep 2008 Posts: 39 Shelton Wa 5 51 GMC 100 'Bolter
51 GMC 100 'Bolter 5 Joined: Sep 2008 Posts: 39 Shelton Wa	Thank you!!! I am going nowhere fast and it's not taking me long to get there !!!!

Moderated by Gdads51

Hop To

Link Copied to Clipboard