| |
Click on image for the lowdown. 
====
| | |
8 members (Mike B, WICruiser, Youngin' Tut 59, Pete1946, Bizaircon, klhansen, LuckyLee, 1 invisible),
72
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,140 Posts1,056,770 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2000 Posts: 19 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2000 Posts: 19 | Hi folks
I have a 65 that I am going to replace the engine in. Previous owner had a 250 weld to some crappy homemade motor mount. Just wondering what will bolt in the old truck to cradle a 305 motor.
I know you guys are the experts so I hope to find out soon. Might be hauling it out next week. Then the hunt for parts begin
thanks all,
Vic (gmc 910)
Also I use to have a boxwood cutting digram, but a computer crash took all the old stuff.
anyone have a wood cutting diagram for a 65 longbox fleetside ?
Turn them Tires, so ya can smoke 'em and choke 'em ![[Linked Image from angelfire.com]](http://www.angelfire.com/ns/2xcapers/images/GMC_910_avatar.gif) Vic... '65 GMC 910
| | | | | Joined: Sep 2000 Posts: 19 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2000 Posts: 19 | Hi folks.
Someone must be able to point me in the right direction on this motor mount question?
anyone?
Turn them Tires, so ya can smoke 'em and choke 'em Vic... '65 GMC 910
| | | | | Joined: May 2009 Posts: 99 Wrench Fetcher | | Wrench Fetcher Joined: May 2009 Posts: 99 | If you are talking about the SBC 305, all the v-8 motor perches and mounts will work. Thats if the po welder didn't weld the holes closed. You should be able to find them salvage, but there are custom made ones also. Dave
Dave.
What's the last thing a red neck says, "Hey guys watch this."
What's the last thing a redneck hears, "Go ahead Bubba, you can do it."
Build plan: 65 Chevy one ton, 5.9L Cummins HO, NV5600 six speed, 2wd 1972-1987 IFS disk front, frame off restore/mod, custom dump/flat bed, Alcoa rims, Dana 70 3.73:1 duals drum rear, plush interior, Guards red with Marine Corps decals. Donor is retired 2002 Ram 2500, 194K miles.
| | |
|
|
| |
