| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,009 Posts1,055,297 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#53895 12/23/2005 1:27 PM | Joined: Mar 2005 Posts: 158 Shop Shark | | Shop Shark Joined: Mar 2005 Posts: 158 | In disassembly phase.
Pulling my 235, and planning to bring the trans out with it.
Front sheet metal is off.
Cherry picker is ready to go...
Where's the best place to attach the chain?
Want to keep it nice and level,
without damaging anything.
Thanks!
mark.
'51 KY 3100 | | |
#53896 12/23/2005 5:34 PM | Joined: Mar 2005 Posts: 1,513 'Bolter | | 'Bolter Joined: Mar 2005 Posts: 1,513 | Fourth head bolt from the back on left, and third from the rear on right as per shop manual. This will balance with a 3 speed attached. I made extra long eye bolts by welding rings to 6" long 1/2" bolts. That way I did'nt have to disturb the valve cover or rocker assembly. Here's that page in the car shop manual. http://chevy.tocmp.com/1949_53shop/06engine/6_031.HTM Curt B.
1952 1300 Canadian 1/2 ton restomod You Tube | | |
|
|
| |
