| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,151 Posts1,057,001 Members48,460 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#52156 11/09/2005 9:33 PM | Joined: Jun 2005 Posts: 50 Member | | Member Joined: Jun 2005 Posts: 50 | Befor I replace the bed it's easyer to stop the leak on the rearend and also the driveshaft to rear seals. It's a ten bolt rear and I don't know where to get the gaskets for this 3/4 ton 3600. Also how do I go about re gasketing it?
PJP
| | |
#52157 11/09/2005 10:49 PM | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | If it,s leaking at the pinion seal where the drive shaft yoke goes into the rear end you pull the drive shaft loose. Than remove the yoke. Than remove the 5 bolts that hold the flange with the seal. Replace the seal & reassemble the parts. The gasket & seal can be purchased at a parts store or American Classic parts. If the rear cover is leaking you can remove it & replace the gasket. If grease is leaking out the rear drums you will have to pull them & replace the seals.
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | |
#52158 11/09/2005 11:02 PM | Joined: Feb 2005 Posts: 531 Shop Shark | | Shop Shark Joined: Feb 2005 Posts: 531 | I made gasgets out of a thin cardboard... used the old ones as a template....and they're working real fine! | | |
#52159 11/10/2005 1:26 PM | Joined: Jun 2005 Posts: 50 Member | | Member Joined: Jun 2005 Posts: 50 |
PJP
| | |
|
|
| |
