| |
Click on image for the lowdown. 
====
| | |
0 members (),
118
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,151 Posts1,057,000 Members48,460 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#52157 11/09/2005 10:49 PM | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | If it,s leaking at the pinion seal where the drive shaft yoke goes into the rear end you pull the drive shaft loose. Than remove the yoke. Than remove the 5 bolts that hold the flange with the seal. Replace the seal & reassemble the parts. The gasket & seal can be purchased at a parts store or American Classic parts. If the rear cover is leaking you can remove it & replace the gasket. If grease is leaking out the rear drums you will have to pull them & replace the seals.
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | |
|
|
| |
