| |
BUSY BOLTERS Are you one?  The Shop Area
continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.
| | Click on image for the lowdown. 
====
| | | Forums66 Topics126,781 Posts1,039,301 Members48,100 | | Most Online2,175
Jul 21st, 2025 | | | | Joined: Feb 2009 Posts: 13 New Guy | | New Guy Joined: Feb 2009 Posts: 13 | Hi huys Im new here so If the post is in the wrong section, feel free to move it. I need tune up specs for my 1966 Chevrolet C-10 it has a 250c.i. six cylinder.
thanks
1950 Chevrolet 3600 runs but needs a lot of tlc its an old farm truck
1966 Chevrolet C-10 3 on the tree, 250c.i. six runs and drives. Needs restore(possibly in the next two years)
| | | | | Joined: Nov 2005 Posts: 266 Shop Shark | | Shop Shark Joined: Nov 2005 Posts: 266 | Welcome to the 'Bolt, JDF! What all are you working on on your 250? Let me know and I can look up the numbers for you in my '66 Service Manual. | | | | | Joined: Aug 2008 Posts: 230 Shop Shark | | Shop Shark Joined: Aug 2008 Posts: 230 | hey guy i e-mailed two scan's of a motor manual for trucks that year range i hope they come out the 66 is in the 55th section down if you cant read them e-mail me and i wioll spell them out . seabee2mchsi.com | | | | | Joined: Feb 2009 Posts: 13 New Guy | | New Guy Joined: Feb 2009 Posts: 13 | thanks guys I know I havent replied back but I have been having a hard time logging in on the site. (admins if you see this send me a pm) I cant figure out how to adjust the gap on the points, I know how to do it on my 1950 Chevy that has a 235c.i. in it, but the distributor is different. It has one screw in the points plate and when I loosen it to adjust the points gap the whole plate moves. Is this supposed to happen? help please! thanks in advance guys because I might not be able to log back on.
1950 Chevrolet 3600 runs but needs a lot of tlc its an old farm truck
1966 Chevrolet C-10 3 on the tree, 250c.i. six runs and drives. Needs restore(possibly in the next two years)
| | | | | Joined: Feb 2000 Posts: 4,886 'Bolter | | 'Bolter Joined: Feb 2000 Posts: 4,886 | | | | | | Joined: Feb 2009 Posts: 13 New Guy | | New Guy Joined: Feb 2009 Posts: 13 | thanks Joe! I got the truck to run right. I gapped all of the plugs and it still didnt run on all six. I let it run until it warmed up and began running on all six cylinders and it has been for the last couple of days. It sits up a lot and the rough running is probably the effect of sitting up. It has had about 3-4K put on it since the year of 2000.
1950 Chevrolet 3600 runs but needs a lot of tlc its an old farm truck
1966 Chevrolet C-10 3 on the tree, 250c.i. six runs and drives. Needs restore(possibly in the next two years)
| | |
|
|
| |
