| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,026 Posts1,055,403 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#50095 09/13/2005 7:55 PM | Joined: May 2005 Posts: 27 Junior Member | | Junior Member Joined: May 2005 Posts: 27 | What dose the e-brake cable connect to inside the brake drum. This is on a 54 3100 1/2. This was the first thing I did on this restoration 21/2 years ago and i just don"t remenber if I lost something or it was missing.
Thanks Manfighter 16 | | |
#50096 09/13/2005 8:08 PM | | Anonymous Unregistered | | Anonymous Unregistered | Typically the e-brake cable attaches to the bottom of the rear shoe on the inside surface. The cable also has a mounting flange that makes the connection to the back side of the backing plate. | | |
#50097 09/15/2005 8:20 PM | Joined: May 2005 Posts: 27 Junior Member | | Junior Member Joined: May 2005 Posts: 27 | Thanks Houston54, I think my is missing the spreader bar between front and back shoe. I would like to see a picture so I could find one or make
one.If any body has a picture it would help.
Manfighter16 | | |
#50098 09/15/2005 9:35 PM | | Anonymous Unregistered | | Anonymous Unregistered | I have the assembly manual at the house which should have a pic of the brake shoe assembly. I will look tonight but also look out on the tech tip section of the bolt as I thought I had seen it there previously. | | |
|
|
| |
