| |
BUSY BOLTERS Are you one?  The Shop Area
continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.
| | Click on image for the lowdown. 
====
| | | Forums66 Topics126,777 Posts1,039,269 Members48,100 | | Most Online2,175
Jul 21st, 2025 | | | | Joined: Feb 2003 Posts: 1,339 'Bolter | | 'Bolter Joined: Feb 2003 Posts: 1,339 | I need some pics of the lower outlet to see if its similar to a 37,I am wanting to put a original 3 piece lower hose on my 37 but I have a 54 water pump which has the same angle of the outlet as back to 41 and I want to see some pics of the lower outlet so I can see if a 41-6 lower hose kit will work. A local junkyard has a few but I dont know if the radiators are still in them plus there is probably over a foot of snow in it so if anyone has any pics handy I would appriciate it and I could not find any original radiators on ebay at this time. | | | | | Joined: Sep 2001 Posts: 581 Shop Shark | | Shop Shark Joined: Sep 2001 Posts: 581 | Jeff, didn't take these for the Radiator, but see if they help. 41 1.5 ton. Lower hose connected, but not to pump. Radiator, R. Side From front angle Hope this helps? -Michael | | | | | Joined: Sep 2003 Posts: 151 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2003 Posts: 151 | Jeff I don't have a pic of it but the lower connection on my '46 is oval, curves slightly to the outside and is 2" OD wide X 1 1/8" OD tall. I hope thats the info your looking for
Last edited by Bluepen; 01/31/2009 7:08 PM.
David
Just a firefighter,
Cleverly disguised as a responsible adult
'46 1/2 T Panel
| | | | | Joined: Feb 2003 Posts: 1,339 'Bolter | | 'Bolter Joined: Feb 2003 Posts: 1,339 | Since the sun was out and it was a little warmer I hit the junkyard that has a few 41-6s and I think I can use a 41-6 3 piece lower hose kit on my 37 with the 54 water pump as the lower radiator outlet looks similar to a 37,I did look for other parts and found the generator brackets but could not find a horn that looked good enough due to the hoods being open for many years. I did find a 54 235 intake I will grab too because on the 57 intake the carb is angled too much and with a 54 intake the carb will sit more level then with the 57 intake. Jeff | | |
|
|
| |
