| |
Click on image for the lowdown. 
====
| | |
8 members (78buckshot, Woodcmiami, cmayna, Hotrod Lincoln, Gdads51, mick53, MickeyP, 1 invisible),
38
guests, and
10
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,012 Posts1,055,312 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2008 Posts: 6 New Guy | | New Guy Joined: Dec 2008 Posts: 6 | I am trying to find a stock tracking arm for my 62 C10. Is the adjustable model for lowering capable of extending to the original length? LMC does not seem to have anything execpt for 65-66. Thanks... | | | | | Joined: Jul 2006 Posts: 40 Shop Shark | | Shop Shark Joined: Jul 2006 Posts: 40 | Trailing arms are all interchangeable from 1960 to 1972 | | | | | Joined: Dec 2008 Posts: 2 New Guy | | New Guy Joined: Dec 2008 Posts: 2 | Does anyone know how long they are? Thanks!!! | | | | | Joined: Dec 2008 Posts: 6 New Guy | | New Guy Joined: Dec 2008 Posts: 6 | I don't need the trailing arms. I was asking about the tracking arm which goes from the frame to the rear end to keep it from twisting or leaning. LMC only has adjustables for dropped trucks and for 65-66. I assume it is a different length for the 62.
I could get an adjustable and modify it if it will nod extend to the correct length.
Anybody know the correct stock length for a 62? | | | | | Joined: Sep 2006 Posts: 2,393 Shop Shark | | Shop Shark Joined: Sep 2006 Posts: 2,393 | I would think that if your 62 C10 had a Tracking Arm(Panhard Bar) originally it would be easy to see where it attached giving the required length. If it didn't then you would have to fab brackets anyway, so I would go with the modified type with threaded spherical heim joints.Check a 4 wheel drive aftermarket supplier. They would have all kinds of combinations for your truck.
Drew
| | | | | Joined: Jul 2006 Posts: 40 Shop Shark | | Shop Shark Joined: Jul 2006 Posts: 40 | I don't know the length of the arm you need, but I'm looking in the GM parts book, and 60-62 are by themselves -63-64 are also by themselves, and 65-72 are all the same. (In 1/2ton I'm talking. | | | | | Joined: Dec 2008 Posts: 2 New Guy | | New Guy Joined: Dec 2008 Posts: 2 | Classic Performance Parts can probably help. They have three listed but have been extremely helpful answering questions over the phone. Their web is classicperform.com | | |
|
|
| |
