The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
5 members (78buckshot, 49oneton, Napco Man, Otto Skorzeny, tclederman), 121 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,115
Posts1,056,623
Members48,450
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#426732 06/26/2008 2:04 AM
Joined: Dec 2006
Posts: 113
T
Shop Shark
Shop Shark
T Offline
Joined: Dec 2006
Posts: 113
If you order parts such as fenders that come painted, do you need to strip them before painting or can you paint over the paint on them? whar is the prefered method?

Joined: Jan 2008
Posts: 4,962
C
'Bolter
'Bolter
C Offline
Joined: Jan 2008
Posts: 4,962
It is probably primer and you sand and prep them like you would your own primer. I think it would be a mess if you would try to strip the primer.

Joined: Sep 2007
Posts: 2,644
C
Shop Shark
Shop Shark
C Offline
Joined: Sep 2007
Posts: 2,644
Go over them real good with a green Scotch pad to break the shine and then put a coat of primer over that and then paint.


Woody
Your Brother in Bolthood

My 1951 half-ton 'Ol Red

Save the VINTAGE DOOR ART! Please contribute photos.
Door Art Collection
Joined: Sep 2001
Posts: 29,270
Bubba - Curmudgeon
Bubba - Curmudgeon
Joined: Sep 2001
Posts: 29,270
Most replacement sheet metal parts come with this coating. Here is information about the coating "EDP= Electro-deposit primer, which is a method of attaching primer to bare steel by electrically charging it. This process has been tested in 500 hours of salt spray with no corrosive effects. The only surface preparation required is scuffing of surface for better paint adhesion before painting. These parts are protected from rust as long as EDP coating remains under the paint."

Joined: Aug 2008
Posts: 5
M
New Guy
New Guy
M Offline
Joined: Aug 2008
Posts: 5
If the coating is black, it is most likely an Electrodeposition Coating (otherwise known as E-Coat). Scuff with a red scotch-brite pad, seal, and you're ready for paint.


Moderated by  klhansen 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0