| |
Click on image for the lowdown. 
====
| | |
0 members (),
128
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,167 Posts1,057,021 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2004 Posts: 2 Moderated | | Moderated Joined: Apr 2004 Posts: 2 | I'm taking the rear side glasses out of a '50 Suburban in order to chop the top and GM used some screws both pan head and countersunk head with a little "hourglass" or "bowtie" recessed head? What are they called and where can I find a driver? Thanks John B. | | | | | Joined: Jul 2007 Posts: 461 Shop Shark | | Shop Shark Joined: Jul 2007 Posts: 461 | Its called a "clutch head" screw, and the driver should be available at tool stores. Sometimes the screw is called "figure eight" head.
Harvester | | | | | Joined: Mar 2006 Posts: 1,703 Shop Shark | | Shop Shark Joined: Mar 2006 Posts: 1,703 | Yep what Harvester said , your local FLAPS should carry them sometimes you can find at Wally | | | | | Joined: Dec 2007 Posts: 198 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2007 Posts: 198 | Also, virtually all the classic truck parts suppliers handle these clutch head tools in both screwdrivers and sockets. You can buy individually or in sets.
Jim G | | | | | Joined: Sep 2007 Posts: 75 Shop Shark | | Shop Shark Joined: Sep 2007 Posts: 75 | I would try NAPA. Not sure if they have them but it might be worth looking. | | | | | Joined: Oct 2007 Posts: 397 Shop Shark | | Shop Shark Joined: Oct 2007 Posts: 397 | Clutch head is correct! My follow up question is where can I buy these types of screws in stainless??
"Lucille" ..... Proud Member of the "Southern Stovebolts" David Wolff 1946 Chevy 1/2-ton In the Gallery | | | | | Joined: Jan 2007 Posts: 161 Shop Shark | | Shop Shark Joined: Jan 2007 Posts: 161 | don't!!! just go for Phillips, it'll make life easier and cheaper. and do one's going to find out, these things are usually not in sight | | | | | Joined: Sep 2007 Posts: 2,644 Shop Shark | | Shop Shark Joined: Sep 2007 Posts: 2,644 | Clutch head is correct! My follow up question is where can I buy these types of screws in stainless?? Have you tried any of the restoration places like Jim Carter, The Filling Station, etc? I've seen sets with specific uses and sold individually but I can't recall exactly where. | | |
|
|
| |
