| |
Click on image for the lowdown. 
====
| | |
0 members (),
97
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,128 Posts1,056,358 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#25221 03/27/2003 5:30 PM | Joined: Mar 2003 Posts: 2 Junior Member | | Junior Member Joined: Mar 2003 Posts: 2 | I'm requesting advise on the best, easiest complete rear suspension swap for my 37 Chevy PU. I was told one swap would be from a S-10 4X4, not sure what year. I would like posi and around 3.50 gears, but I mainly want an easy swap for the complete rearend (hub to hub). | | |
#25222 03/27/2003 6:57 PM | Joined: Nov 2001 Posts: 58 Member | | Member Joined: Nov 2001 Posts: 58 | 37 I have a 1938 1/2 ton panel delivery which has the same width dimensions I think as your pu. The rearend I used was from a 1988 S10 Blazer and has 3.73 gears and a posi. If you look on the site belwo there are some pictures. In Canada that setup at the wrecking yard was about $350. hub to hub. The only down side to this setup maybe the diameter of the brake drums. Depending on your setup. | | |
|
|
| |
