| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,006 Posts1,055,267 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2007 Posts: 92 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2007 Posts: 92 | All – Just an FYI for anyone who’s buggered up there shaft for there steering column.
I’ve had my steering wheel off a few times and I’m sure the PO too, and the shaft got a bit worn out. So Last night I ran out to the local hardware store and matched the nut up to a bolt. It turns out to be a 1/2 - 20 thread count.
This was great information to me, simply because I could then pick up the correct tap and die set the chase the threads on the shaft.
Now it’s as good as new. Just thought I’d share, because that’s not listed anywhere – not even in the resto-pack I got from GM.
Take care,
HC | | | | | Joined: Oct 2006 Posts: 4,983 Master Gabster | | Master Gabster Joined: Oct 2006 Posts: 4,983 | Thanks Heavy-Chevy. That info will be deposited in our archives for everyone to locate when needed.
~Jim
| | |
|
|
| |
