| |
Click on image for the lowdown. 
====
| | |
8 members (1955 1 Series, Rusted Nut, Otto Skorzeny, cmayna, Pre '68 Dave, Gdads51, Joe H, 1 invisible),
97
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,192 Posts1,057,251 Members48,466 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2005 Posts: 8 Apprentice | | Apprentice Joined: Oct 2005 Posts: 8 | i am going to start applying the 78 gmc front axle i have to the 63 gmc.
i have the complete truck outback i would like to switch the front springs to the 78. mine are sagging bad. i heard from good source, well i think so that it is going to be vary hard to do this with the wider springs. i need more advice on this.
i am going to add power steering and disc brakes. my truck is a k20 manual. i need to add the slave cylinder. what did you fellas use for yours?
i am going to use the tilt steering column, shaft, pump and gear box. will i need the box bracket if i have the column from the 78 as well?
how hard will it be to use the 78 booster and master cylinder?
thanks ahead of time josh | | | | | Joined: Jun 2005 Posts: 221 Wrench Fetcher | | Wrench Fetcher Joined: Jun 2005 Posts: 221 | shouldnt be a problem just use the mounting brackets for the wide springs | | | | | Joined: Oct 2005 Posts: 8 Apprentice | | Apprentice Joined: Oct 2005 Posts: 8 | well the springs are longer that is the problem. i think i have decided so far on the info i have got that i will purchase new springs.
i am really interested in knowing about the clutch master cylinder though. | | | | | Joined: Jun 2005 Posts: 221 Wrench Fetcher | | Wrench Fetcher Joined: Jun 2005 Posts: 221 | if you change the brackets you can put them where you need them | | | | | Joined: Oct 2005 Posts: 8 Apprentice | | Apprentice Joined: Oct 2005 Posts: 8 | the trans crossmeber is preventing a proper placement. i am just going to get new springs for the front.
i need help with from someone that has done this already for specifics on brake lines and prop. vbalve placement, clutch and brake master cyl. placement. | | | | | Joined: Oct 2005 Posts: 8 Apprentice | | Apprentice Joined: Oct 2005 Posts: 8 | any one have any insight? | | |
|
|
| |
