The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
Stored trucks should have a high-quality security system. A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.
Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
2 members (78buckshot, cmayna), 111 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,279
Posts1,058,593
Members48,492
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#1614329 10/30/2026 4:12 PM
Joined: Mar 2021
Posts: 280
T
'Bolter
'Bolter
T Offline
Joined: Mar 2021
Posts: 280
Attached are photos of camshaft lobes that show pitting. All lobes have the similar pitting. The camshaft bearing support look ok and could be resurfaced.
Asking if this camshaft is repairable?
Attachments
IMG_0454.jpeg (237.87 KB, 73 downloads)
IMG_0453.jpeg (266.47 KB, 69 downloads)
IMG_0455.jpeg (187.9 KB, 71 downloads)
IMG_0456.jpeg (220.02 KB, 68 downloads)
IMG_0457.jpeg (245.68 KB, 73 downloads)

Joined: Sep 2011
Posts: 1,468
B
'Bolter
'Bolter
B Offline
Joined: Sep 2011
Posts: 1,468
You should be able to get it re-ground. If you do, get it ground to 261 specs.


BC
1960 Chevy C10 driver 261 T5 4.10 dana 44 power loc
1949 GMC 250 project in waiting
1960 C60 pasture art
Retired GM dealer tech. 1980 - 2022
Joined: Mar 2021
Posts: 280
T
'Bolter
'Bolter
T Offline
Joined: Mar 2021
Posts: 280
Thanks you. But why to 261 specs? If so how does that impact the solid tappets ? Right now the tappets need to be resurfaced.

Joined: Sep 2011
Posts: 1,468
B
'Bolter
'Bolter
B Offline
Joined: Sep 2011
Posts: 1,468
Same cam grind used on early Corvette 235 engine.
Uses same solid lifters.


BC
1960 Chevy C10 driver 261 T5 4.10 dana 44 power loc
1949 GMC 250 project in waiting
1960 C60 pasture art
Retired GM dealer tech. 1980 - 2022
Joined: Feb 2004
Posts: 29,960
H
Kettle Custodian (pot stirrer)
Kettle Custodian (pot stirrer)
H Offline
Joined: Feb 2004
Posts: 29,960
Contact Schneider cams in San Diego CA. They can put just about any grind on a good camshaft core, and they have experience with stovebolt camshafts. +1 on the 261 cam specifications, or use the specs for the Melling CCS-1 cam, which has a little more exhaust valve duration for better cylinder scavenging without causing a rough idle. Compared to a reground cam, I'd just go directly to the Melling cam without bothering to try to get an original cam reground.
Jerry


"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!

Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0