The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
Stored trucks should have a high-quality security system. A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.
Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
6 members (pauld, DennisM, Chev4t6, lumbersawyer, Phak1, J Lucas), 110 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,279
Posts1,058,593
Members48,492
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
Joined: Oct 2026
Posts: 53
I
'Bolter
'Bolter
I Offline
Joined: Oct 2026
Posts: 53
Hi folks,

I want to hook up my vacuum gauge to tune my Carter BB1 updraft carb that's mounted on my 1962 235 motor in my Grumman-Olson Kurbside step van/Chevy P30

My intake manifold has a two port fitting screwed into it. The vacuum port circled in red goes to my windshield wipers. The vacuum port circled in green goes to the PCV valve.

I plan on removing the hose to the wipers and hooking up my vacuum gauge to that port. My question is, can I then do my carb adjustment, or do I need to block off the vacuum port going to the PCV valve to do the adjustment ?

Thanks!

-Konstantine
Attachments
IMG_20260820_111155572_HDR~2.jpg (194.08 KB, 55 downloads)


~~ Konstantine
1962 Grumman Olson Kurbside/Chevy P30
Follow in the DITY
Joined: Jan 2022
Posts: 2,526
B
'Bolter
'Bolter
B Online: Content
Joined: Jan 2022
Posts: 2,526
Unless you plan to remove the PCV valve permantly, I'd leave it connected, temporarily remove the wiper hose and hook the vacuum gauge there


'57 GMC 102, Original 347 V8, HydraMatic, 3.08 rear gear, added A/C, disk front brakes, HEI, AFB carb, '98 Honda Black Currant paint. T-boned and totaled 10/12
'52 GMC 152 Stake Bed, Original 228, SM420, added A/C, HEI, disk front brakes, '67 Chev 3.55 rear gear. Gets used as a real truck.
Joined: Oct 2026
Posts: 53
I
'Bolter
'Bolter
I Offline
Joined: Oct 2026
Posts: 53
Okay, thanks!

No, the PCV valve is remaining.

That's what I figured, but wanted to make sure.


~~ Konstantine
1962 Grumman Olson Kurbside/Chevy P30
Follow in the DITY
Joined: Mar 2010
Posts: 10,336
5
Renaissance Man
Renaissance Man
5 Offline
Joined: Mar 2010
Posts: 10,336
The PVC valve is essentially a consistent vacuum leak. This needs to hooked up when adjusting the carburetor whether you use a vacuum gauge or a tachometer. If you unkook the PVC, then adjust the carburetor, your settings will be off when you hook the PVC back up.


1952 5-window - return to "as built" condition | 1950 3100 with a 235 and a T-5 transmission
Joined: Oct 2026
Posts: 53
I
'Bolter
'Bolter
I Offline
Joined: Oct 2026
Posts: 53
Thanks. That makes perfect sense. I kind of figured this would be the case but wanted to be certain. I appreciate your help.


~~ Konstantine
1962 Grumman Olson Kurbside/Chevy P30
Follow in the DITY

Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0