Winter is Coming
Time to think about winterizing your Bolt.
A good Tech Tip WINTERIZING YOUR TRUCK including a link back to the Forums for additional tips.
See other Threads on this engine’s Teardown. Today while inspecting the oil manifold ports at the crankshaft supports I got a big surprise, that being that there is what looks like a sheared drill bit or something like that at the #1 front crankshaft oil port. I’ve blown compressed air e into the hole and I can feel air coming out at the oil pump manifold oil line adapter fitting. All other oil ports fed from the manifold are clear and compressed are flows well. I’ve thought that the local engine shop could drill the blocks hole, extract whatever it is, and install a flush bushing to make up for amount shaved off. OR just leave it alone, and cross my fingers. See attached picture. The in question here is the top hole not the blind hole.
Last edited by TexasA&M48Truck; 10/28/202611:07 PM. Reason: Add pictures
I’ve resolved the mystery of what’s in the #1 oil lubrication port. I trying to extract the foreign object I accidentally pushed it deeper into the oil lubrication manifold. I had to remove the front oil manifold cap and then I was able to extract the FOD. It looks like someone during this engine overhaul plugged the port with aluminum foil. See attached pictures
Kevin 1951 Chevy 3100 work truck Follow this saga in Project Journal Photos 1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car) Busting rust since the mid-60's If you're smart enough to take it apart, you darn well better be smart enough to put it back together.