| |
Click on image for the lowdown. 
====
| | |
2 members (papas52, Jon G),
94
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,164 Posts1,056,975 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2021 Posts: 263 'Bolter | | 'Bolter Joined: Mar 2021 Posts: 263 | We are at a quagmire with Spare Tire installation. We can’t find an under- bed spare tire assembly, and the solutions to install a bed side rail adapter places the tire, in my opinion, so far out and forward that it looks ugly and interfering with driver side entry. I don’t have a left hand rear fender with the concaved panel either. My truck has right hand under-bed fuel tank and the truck short/bed.
So I have considered a modern under-bed hoisting mechanism.
Has anyone out there installed an under-bed hoisting mechanism and what would have to be modified to accept one of these hoists? Would I have to resort to modern skinny spare tire?
Last edited by TexasA&M48Truck; 05/26/2026 11:55 AM. Reason: Add details
| | | | | Joined: Feb 2019 Posts: 4,503 AD Addict & Tinkerer | | AD Addict & Tinkerer Joined: Feb 2019 Posts: 4,503 | There was a recent discussion by Bill Hanlon on this very subject. Here is a link.
Phil Moderator, The Engine Shop, Interiors and Project Journals1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc BrakesProject JournalsStovebolt Gallery Forum | | | | | Joined: Mar 2021 Posts: 263 'Bolter | | 'Bolter Joined: Mar 2021 Posts: 263 | Don’t think this is viable for ½ ton truck. The installation in his case is on a ¾ ton. | | | | | Joined: Jul 2000 Posts: 2,201 Insomniac | | Insomniac Joined: Jul 2000 Posts: 2,201 | OK, try this post. Underbed Spare
Gord 🇨🇦
----
1954 1/2 ton 235 4 speed
| | | | | Joined: Mar 2021 Posts: 263 'Bolter | | 'Bolter Joined: Mar 2021 Posts: 263 | I’m liking this installation. Thanks I’ll study it. | | | | | Joined: Jul 2019 Posts: 559 'Bolter | | 'Bolter Joined: Jul 2019 Posts: 559 | I have used the ford spare tire hoist from a modern superduty on other trucks. Just mount it to a crossmember or weld up a flange onto one and your good to go. Just get the crank tool to wind it. | | | | | Joined: Sep 2020 Posts: 452 'Bolter | | 'Bolter Joined: Sep 2020 Posts: 452 | Here is a link to another thread on the matter, it includes photos of the setup I used on my 1/2 ton, pretty easy…. Chuck https://www.stovebolt.com/ubbthreads/ubbthreads.php/topics/1313943/2
Last edited by Hanks custodian; 05/26/2026 11:58 PM.
Hank: 46 Chev 1/2ton shortbed
2023 Miata RF Club
| | | | | Joined: Mar 2021 Posts: 263 'Bolter | | 'Bolter Joined: Mar 2021 Posts: 263 | | | | | | Joined: Mar 2021 Posts: 263 'Bolter | | 'Bolter Joined: Mar 2021 Posts: 263 | Hank, looks very nice install. I’m really inclined to use this concept.
Thanks | | |
|
|
| |
