| |
Click on image for the lowdown. 
====
| | |
3 members (carbking, DaveV, 1 invisible),
81
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,136 Posts1,056,427 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2024 Posts: 237 'Bolter | | 'Bolter Joined: Apr 2024 Posts: 237 | I'm about ready to install a new bushing in the trans tail shaft. My approach is to use something a little softer than the bushing to drive it in. Maybe a piece of oak wood or maybe brass. Any thoughts?
1956 3100 three speed 6 cyl. Stock with a few upgrades.
| | | | | Joined: Feb 2004 Posts: 29,818 Kettle Custodian (pot stirrer) | | Kettle Custodian (pot stirrer) Joined: Feb 2004 Posts: 29,818 | I just use a socket a little bigger than the outside diameter of the bushing. They're made with a bronze layer inside a steel sleeve- - - -not fragile at all. Use a short extension in the socket and a heavy dead blow mallet to do the driving. I've installed dozens of output bushings and torque converter bushings that way when I was rebuilding a lot of automatic transmissions- - - -haven't ruined one yet!
Jerry
"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
| | | | | Joined: Dec 2012 Posts: 122 'Bolter | | 'Bolter Joined: Dec 2012 Posts: 122 | A parts store may loan or rent you a bushing tool.
A few years ago I borrowed a tool (compression tester?) from a local store and was stunned to learn it was free. Just had to leave a credit card number as collateral.
“Ye have not because ye ask not” 😉
gld | | | | | Joined: Apr 2024 Posts: 237 'Bolter | | 'Bolter Joined: Apr 2024 Posts: 237 | Jerry and Greg. Thanks very much. I've used the socket driver before but haven't done a bushing in a very long time.
1956 3100 three speed 6 cyl. Stock with a few upgrades.
| | |
|
|
| |
