The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Fixing the old truck

BUSY BOLTERS
Are you one?

Where is it?? The Shop Area

continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
2 members (Truckrolet, klhansen), 494 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics126,777
Posts1,039,268
Members48,100
Most Online2,175
Jul 21st, 2025
Step-by-step instructions for pictures in the forums
Previous Thread
Next Thread
Print Thread
Joined: Aug 2018
Posts: 729
M
'Bolter
'Bolter
M Offline
Joined: Aug 2018
Posts: 729
I am about to attempt a two tone paint job. I've never tried this before. My paint is base coat / clear coat PPG Shop Line. I've never used base coat paint before either. What do I need to know about taping, timing, etc.?


Mike Burns
1940 Chev 1/2 ton
1953 Chev 1/2 ton
1950 Studebaker Starlight Coupe
1947 Indian Chief
1943 Indian 741
Joined: May 2015
Posts: 9,830
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Joined: May 2015
Posts: 9,830
HERE is the data sheet for Shop line. Looks like you need to work fairly quickly. 45 minutes before you can tape, and then you need to clear after 20 minutes and BEFORE 24 hours.

So first color, wait 45 minutes, tape and shoot second color, then clear the whole thing.


Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Joined: Aug 2018
Posts: 729
M
'Bolter
'Bolter
M Offline
Joined: Aug 2018
Posts: 729
Thanks for that info. I have never been sure whether the "Tape 45 minutes" meant that you could apply tape after 45 minutes, or whether you could remove tape after 45 minutes.


Mike Burns
1940 Chev 1/2 ton
1953 Chev 1/2 ton
1950 Studebaker Starlight Coupe
1947 Indian Chief
1943 Indian 741
Joined: Mar 2010
Posts: 10,059
5
Renaissance Man
Renaissance Man
5 Offline
Joined: Mar 2010
Posts: 10,059
Just make certain that all of your coats of primer and color have been applied so that they have adhered to each other before you apply tape so that you don't pull the paint off. Use the green painters tape instead of blue tape. It is less sticky.


1952 5-window - return to "as built" condition | 1950 3100 with a 235 and a T-5 transmission
Joined: May 2015
Posts: 9,830
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Joined: May 2015
Posts: 9,830
Mike, go HERE and get the tech sheet for the actual paint you're using. Apparently there are a bunch of different Shop Line products. I just picked one that I thought was what you had. But check to be sure.


Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Joined: Aug 2018
Posts: 729
M
'Bolter
'Bolter
M Offline
Joined: Aug 2018
Posts: 729
Thanks, I will do that.


Mike Burns
1940 Chev 1/2 ton
1953 Chev 1/2 ton
1950 Studebaker Starlight Coupe
1947 Indian Chief
1943 Indian 741

Moderated by  klhansen 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Release build 20240826)
Responsive Width:

PHP: 8.3.11 Page Time: 0.017s Queries: 14 (0.014s) Memory: 0.6121 MB (Peak: 0.6625 MB) Data Comp: Zlib Server Time: 2025-09-22 05:58:15 UTC
Valid HTML 5 and Valid CSS