The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
5 members (Johnny N, tesa, Chris's 46 / 515, Gray_Ghost, Youngin' Tut 59), 76 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,076
Posts1,055,924
Members48,430
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#1552419 07/12/2024 12:21 AM
Joined: Jun 2020
Posts: 15
I
'Bolter
'Bolter
I Offline
Joined: Jun 2020
Posts: 15
I have this air cleaner (see attached) I've always thought it to be an oil bath, but I can't seem to figure out how to "load" the oil. It doesn't separate to reveal an internal bowl like some I've seen. I want to use it on my 216 but need some instruction!

Thoughts?
Attachments
IMG_6592.jpg (299.05 KB, 226 downloads)
IMG_6591.jpg (362.47 KB, 223 downloads)
IMG_6593.jpg (296.33 KB, 223 downloads)

Joined: Jan 2022
Posts: 2,448
B
'Bolter
'Bolter
B Offline
Joined: Jan 2022
Posts: 2,448
That is not an oil bath filter. It is an oil wetted filter. Instructions for the same filter in a GMC truck say
Attachments
clipboard01.jpg (26.6 KB, 212 downloads)


'57 GMC 102, Original 347 V8, HydraMatic, 3.08 rear gear, added A/C, disk front brakes, HEI, AFB carb, '98 Honda Black Currant paint. T-boned and totaled 10/12
'52 GMC 152 Stake Bed, Original 228, SM420, added A/C, HEI, disk front brakes, '67 Chev 3.55 rear gear. Gets used as a real truck.
Joined: Jun 2020
Posts: 15
I
'Bolter
'Bolter
I Offline
Joined: Jun 2020
Posts: 15
Thanks!! Does anyone recommend trying to run an appropriately sized paper element in place of the oil-wetted steel?

Joined: Jan 2022
Posts: 2,448
B
'Bolter
'Bolter
B Offline
Joined: Jan 2022
Posts: 2,448
I use one. I couldn't find a short enough filter looking through Fram's catalog, so I had to extend the bolt that holds down the lid. I'll go out in the garage and get the number from the filter in an hour or two.


'57 GMC 102, Original 347 V8, HydraMatic, 3.08 rear gear, added A/C, disk front brakes, HEI, AFB carb, '98 Honda Black Currant paint. T-boned and totaled 10/12
'52 GMC 152 Stake Bed, Original 228, SM420, added A/C, HEI, disk front brakes, '67 Chev 3.55 rear gear. Gets used as a real truck.
Joined: Jan 2022
Posts: 2,448
B
'Bolter
'Bolter
B Offline
Joined: Jan 2022
Posts: 2,448
Third picture shows the extended lid hold down bolt.
Attachments
20240712_095839.jpg (44.73 KB, 176 downloads)
20240712_095922.jpg (77.6 KB, 178 downloads)
20240712_095947.jpg (159.49 KB, 178 downloads)


'57 GMC 102, Original 347 V8, HydraMatic, 3.08 rear gear, added A/C, disk front brakes, HEI, AFB carb, '98 Honda Black Currant paint. T-boned and totaled 10/12
'52 GMC 152 Stake Bed, Original 228, SM420, added A/C, HEI, disk front brakes, '67 Chev 3.55 rear gear. Gets used as a real truck.
Joined: Jun 2020
Posts: 15
I
'Bolter
'Bolter
I Offline
Joined: Jun 2020
Posts: 15
Thanks, Bill! That's exactly what I need! Appreciate you!

Joined: Jun 2020
Posts: 15
I
'Bolter
'Bolter
I Offline
Joined: Jun 2020
Posts: 15
Bill--Got the WIX filter you suggested and made a new threaded rod---works great!

Joined: Dec 2010
Posts: 47
T
'Bolter
'Bolter
T Offline
Joined: Dec 2010
Posts: 47
Does the Fram CA140 also work?


1949 3100
Joined: Jan 2022
Posts: 2,448
B
'Bolter
'Bolter
B Offline
Joined: Jan 2022
Posts: 2,448
Originally Posted by tricordati
Does the Fram CA140 also work?

I've used both. The threaded rod needs to be a little longer to make up for the slightly taller filter element. I had mine welded in place so I didn't have to worry about loose hardware falling through the carb.

Last edited by Bill Hanlon; 07/14/2024 4:11 PM. Reason: spelling

'57 GMC 102, Original 347 V8, HydraMatic, 3.08 rear gear, added A/C, disk front brakes, HEI, AFB carb, '98 Honda Black Currant paint. T-boned and totaled 10/12
'52 GMC 152 Stake Bed, Original 228, SM420, added A/C, HEI, disk front brakes, '67 Chev 3.55 rear gear. Gets used as a real truck.
Joined: Dec 2010
Posts: 47
T
'Bolter
'Bolter
T Offline
Joined: Dec 2010
Posts: 47
Thanks!


1949 3100

Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0