I recently replaced my cab corners and on the inner cab corner there is a hole about 1” that came with a plug from the factory. My truck still had one of these plugs installed but is deteriorated to the point it needs to be replaced. Has anybody found a vendor where these are available? The picture shows the hole.
Phil Moderator, The Engine Shop, Interiors and Project Journals
1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes Project Journals Stovebolt Gallery Forum
Phil, Perhaps this 1" hole plug would fill the need? Lots of other offerings that may be suitable depending on what appearance you want. I web searched 1" rubber hole plugs.
Last edited by Gdads51; 02/10/20244:03 AM. Reason: spelling
~ Dan 1951 Chevy 3 window 3100 Follow this story in the DITY Gallery "My Grandpa Carl's Truck and How it Became Mine" 1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver) US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
Thanks all for your suggestions. It gives me a place to look.
Phil Moderator, The Engine Shop, Interiors and Project Journals
1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes Project Journals Stovebolt Gallery Forum
I just bought a couple of them from Restoration Specialties. Their PN 200724-SCR. Here's a link.
Last edited by klhansen; 02/11/20249:49 PM. Reason: added link
Kevin 1951 Chevy 3100 work truck Follow this saga in Project Journal Photos 1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car) Busting rust since the mid-60's If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
I ordered these this morning before I saw the link Kevin posted. There not GM style but they should work.
Last edited by Gdads51; 02/12/20242:03 PM. Reason: remove tracking data from link
Phil Moderator, The Engine Shop, Interiors and Project Journals
1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes Project Journals Stovebolt Gallery Forum