| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,032 Posts1,055,519 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2016 Posts: 1,037 'Bolter | | 'Bolter Joined: Apr 2016 Posts: 1,037 | I have several hundred pounds of lead flashing left over from commercial building projects. Can I melt this into sticks for lead filler on bodywork or is it the wrong alloy?
Old enough to know better, too young to resist.
| | | | | Joined: Feb 2004 Posts: 29,758 Kettle Custodian (pot stirrer) | | Kettle Custodian (pot stirrer) Joined: Feb 2004 Posts: 29,758 | The short answer is no. Body "lead" is actually solder, with anywhere from 10% to 30% tin in the mix. The more tin, the better quality the filler will be. Then you'll need to spend a few years perfecting your technique at applying, smoothing and finishing the filler, and hoping you can use enough baking soda to neutralize the acid you use to prep the metal. If not. the acid will bleed through and lift the paint after a few months. Also- - - -don't use anything other than nitrocellulose lacquer over lead filler.
I cast target bullets by the thousands and mix my own alloys- - - - -want to sell that lead? I'll be in northern Indiana sometime in the next few months.
Jerry
"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
| | | | | Joined: Apr 2016 Posts: 1,037 'Bolter | | 'Bolter Joined: Apr 2016 Posts: 1,037 | Thanks Jerry. I will just melt it down and use it for weights. It's not getting any easier to come by. I have a friend that owns a large scrap yard and he won't even sell it to me.
Last edited by Peggy M; 01/23/2024 3:05 PM.
Old enough to know better, too young to resist.
| | |
|
|
| |
