| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,005 Posts1,055,253 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2004 Posts: 75 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2004 Posts: 75 | Does anybody have a diagrahm or schematic of the inside of a steering column Mine disintegrated. I have the new bearing that is incased in the plastic with the wire attached. The plastic case was missing. The p.o. had the horn on a horn button taped to the steering column. Thanks in advance. Lou. H. | | | | | Joined: Feb 2002 Posts: 12,029 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Feb 2002 Posts: 12,029 | nothing fancy enough for a diagram Lou, just take off the wheel, get the old bearing out, poke the wire of the new one down the column and out the hole on the side of the column housing sleeve near the dash, push the new bearing into position, wheel back on - if you have the parts for the horn button/cap, put those pieces on and yer honkin
Bill | | |
|
|
| |
