Click on image for the lowdown.
====
Forums66
Topics128,031
Posts1,055,434
Members48,422
Most Online14,466Apr 26th, 2026
AD Chevy Trucks Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
THANKS!
For helping keep this great
old truck web site
on the Internet for
over 30 years! and not clogged down Again, thanks!
Joined: Sep 2021
Posts: 34
'Bolter
'Bolter
Joined: Sep 2021
Posts: 34
I have a 1946 Chevy 1/2 ton that came without a bottom bench seat. I have a chance to pick up a real nice mid 60s C-10 bench. Can I convert the bottom to fit the 46?
Joined: May 2006
Posts: 934
'Bolter
'Bolter
Joined: May 2006
Posts: 934
Anything is possible. These 41-46/7 cabs are much tighter than the later cabs. eBay lists original seats and I’m sure if you posted a Wanted ad here someone can set you up with the correct 41-46 seat
Joined: Oct 2005
Posts: 4,249
"Hey! I sound like Darth Vader!!
"Hey! I sound like Darth Vader!!
Joined: Oct 2005
Posts: 4,249
Plywood and foam? Sculpt it how you want?
Joined: Oct 2005
Posts: 4,249
"Hey! I sound like Darth Vader!!
"Hey! I sound like Darth Vader!!
Joined: Oct 2005
Posts: 4,249
That's how I did my Suburban seats.
Attachments
Joined: Sep 2021
Posts: 34
'Bolter
'Bolter
Joined: Sep 2021
Posts: 34
Nice. Did you use 5" foam? Just lay out a pattern from the bottom and go from there? I like it.
Joined: Oct 2005
Posts: 4,249
"Hey! I sound like Darth Vader!!
"Hey! I sound like Darth Vader!!
Joined: Oct 2005
Posts: 4,249
I started with 5", found it too thick. Went with 4". Made the 3/4" base panel, made the foam slightly larger to soften the plywood edges.
