The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (walter74, Greg_H, Guitplayer, RLB), 94 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,055
Posts1,055,785
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#14340 05/24/2003 12:07 AM
Joined: Feb 2001
Posts: 20
O
Member
Member
O Offline
Joined: Feb 2001
Posts: 20
I need an answer to this question. Should the distributor on my '56 235 CI rotate when the engine is revved up. After I installed my new water pump I had the engine warming up. My son came out to look at it. I had him get in the cab and rev up the engine so I could watch the distributor. Even under fairly hard revving, the distributor did not rotate. It runs good on the road too. Does it really rotate under driving conditions but not by just revving it up sitting in the driveway?

#14341 05/24/2003 12:38 AM
Joined: Dec 2001
Posts: 1,745
T
Member
Member
T Offline
Joined: Dec 2001
Posts: 1,745
Yes it needs to rotate. Take the distributor in your hand, does it turn in either direction? Does it return when you let go?

It should turn clockwise upon revving from idle.

I have had them fairly stuck before. Working them and cleaning stuff might loosen it up. Make sure you don't have a vacuum leak as well. But, if the engine runs so good you might not have a leak.


54 3100 with 235
62 flatbed dump C60 with 261

Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0