| |
BUSY BOLTERS Are you one?  The Shop Area
continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.
| | Click on image for the lowdown. 
====
| | |
3 members (JW51, 3800GUY, 1 invisible),
565
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics126,778 Posts1,039,288 Members48,100 | | Most Online2,175
Jul 21st, 2025 | | | | Joined: Jun 2021 Posts: 69 'Bolter | | 'Bolter Joined: Jun 2021 Posts: 69 | So i got the new heater installed as well as ranco valve (and a new water pump and t stat ) what hose goes to the front of the ranco valve and where does it come from , pump or t stat housing ? and where does the second nipple of the ranco go (the one closest to the firewall) and where does it get fed from pump or t stat ? thanks for the help guys ! i looked for the info but could not find it | | | | | Joined: Dec 2013 Posts: 770 Former BMW Rider | | Former BMW Rider Joined: Dec 2013 Posts: 770 | Hi Mike, Check out this link to the old car manual project. Look at Figure 100 on page 38. Good luck, | | | | | Joined: Jun 2021 Posts: 69 'Bolter | | 'Bolter Joined: Jun 2021 Posts: 69 | thank you handy andy , that was exactly what i was looking for ! | | | | | Joined: Dec 2013 Posts: 770 Former BMW Rider | | Former BMW Rider Joined: Dec 2013 Posts: 770 | You bet!
Here's a written format from SB:
Heater hose placement schematic
Hose from the water pump goes to heater(PS).
Hose from thermostat goes to control valve(closest to firewall).
Hose from control valve(closest to front), goes
to heater(DS) | | | | | Joined: Jun 2021 Posts: 69 'Bolter | | 'Bolter Joined: Jun 2021 Posts: 69 | hopefully i didnt cause any damage to the valve i had those connections reversed | | |
|
|
| |
