| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,196 Posts1,057,392 Members48,469 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2021 Posts: 69 'Bolter | | 'Bolter Joined: Jun 2021 Posts: 69 | So i got the new heater installed as well as ranco valve (and a new water pump and t stat ) what hose goes to the front of the ranco valve and where does it come from , pump or t stat housing ? and where does the second nipple of the ranco go (the one closest to the firewall) and where does it get fed from pump or t stat ? thanks for the help guys ! i looked for the info but could not find it | | | | | Joined: Dec 2013 Posts: 795 Former BMW Rider | | Former BMW Rider Joined: Dec 2013 Posts: 795 | Hi Mike, Check out this link to the old car manual project. Look at Figure 100 on page 38. Good luck, | | | | | Joined: Jun 2021 Posts: 69 'Bolter | | 'Bolter Joined: Jun 2021 Posts: 69 | thank you handy andy , that was exactly what i was looking for ! | | | | | Joined: Dec 2013 Posts: 795 Former BMW Rider | | Former BMW Rider Joined: Dec 2013 Posts: 795 | You bet!
Here's a written format from SB:
Heater hose placement schematic
Hose from the water pump goes to heater(PS).
Hose from thermostat goes to control valve(closest to firewall).
Hose from control valve(closest to front), goes
to heater(DS) | | | | | Joined: Jun 2021 Posts: 69 'Bolter | | 'Bolter Joined: Jun 2021 Posts: 69 | hopefully i didnt cause any damage to the valve i had those connections reversed | | |
|
|
| |
