| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,021 Posts1,055,354 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#13812 12/18/2003 5:05 AM | Joined: Sep 2003 Posts: 343 Member | | Member Joined: Sep 2003 Posts: 343 | In my chevy shop manual it tells about the application of "Goodyear Pliabond #3" to the mating surfaces of the flywheel and crankshaft flange prior to bolting them together. I have never seen any of this "Goodyear Pliabond #3" in my local autoparts stores. What would be the modern equivalent to "Goodyear Pliabond #3"?
1954 GMC 1/2-ton Longbed
1971 Pontiac LeMans Sport
| | |
#13813 12/18/2003 8:41 PM | Joined: Jul 2002 Posts: 188 Member | | Member Joined: Jul 2002 Posts: 188 | I don't think I can shed must light, but Pliobond(sp) is a contact cement. | | |
#13814 12/18/2003 9:21 PM | Joined: Jul 2000 Posts: 962 Shop Shark | | Shop Shark Joined: Jul 2000 Posts: 962 | I installed my flywheel to crank dry, then used Red Loctite on the threads of the 6 flywheel bolts. You can use the 12 point SBC flywheel bolts if you need new ones. Don't forget the lock plates if you've got a good set, torque bolts to 60 FT/Lbs.
Preaching the Hot Rod Gospel according to the 4-stroke apostles:
Suck, Squish, Fire and Fumes
| | |
|
|
| |
