Click on image for the lowdown.
====
1 members (Donf Key: Admin ,
Global Mod ,
Mod
Forums66
Topics128,026
Posts1,055,405
Members48,422
Most Online14,466Apr 26th, 2026
AD Chevy Trucks Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
THANKS!
For helping keep this great
old truck web site
on the Internet for
over 30 years! and not clogged down Again, thanks!
Joined: Dec 2019
Posts: 33
'Bolter
'Bolter
Joined: Dec 2019
Posts: 33
Looking to put new rims on my 49. It has an 1970 ish rear end, the hub size is 3" the rims are 72.6 mm or 2.85 inches. considering turning hub on the lathe. has anyone experienced this or have a better solution. don't really want to hog out the rims. thanks
Attachments 3.jpg (152.92 KB, 77 downloads)
Last edited by rad; 07/01/2020 8:43 PM .
Joined: Apr 2016
Posts: 1,036
'Bolter
'Bolter
Joined: Apr 2016
Posts: 1,036
I don't know much about it but I'm impressed you said lathe and not grinder.
Joined: Jun 2011
Posts: 5,096
Crusing in the Passing Lane
Crusing in the Passing Lane
Joined: Jun 2011
Posts: 5,096
Have to pull the axle to turn down end, look for proper rims, or turn the wheels on a lathe.
Joined: Apr 2005
Posts: 2,832
'Bolter
'Bolter
Joined: Apr 2005
Posts: 2,832
A suggestion; it is very easy to turn one down on a lathe but LEAVE THE THICKNESS of the brake drum the original size on the axle pilot (hub). You really don't need a "floating" brake drum that is only positioned by often not too tight fitting (to the brake drum) wheel lug bolts.
Joined: Jul 2000
Posts: 2,187
Insomniac
Insomniac
Joined: Jul 2000
Posts: 2,187
ISTM that the best solution would be to identify the rear end. Once you what the donor was, buy wheels that fit.
