Click on image for the lowdown.
====
Forums66
Topics128,066
Posts1,055,875
Members48,428
Most Online14,466Apr 26th, 2026
AD Chevy Trucks Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
THANKS!
For helping keep this great
old truck web site
on the Internet for
over 30 years! and not clogged down Again, thanks!
Joined: Sep 2019
Posts: 56
Wrench Fetcher
Wrench Fetcher
Joined: Sep 2019
Posts: 56
Hello,
Attachments
Joined: Sep 2019
Posts: 56
Wrench Fetcher
Wrench Fetcher
Joined: Sep 2019
Posts: 56
Here are add details...
Attachments
Joined: Mar 2014
Posts: 154
'Bolter
'Bolter
Joined: Mar 2014
Posts: 154
I installed one about 6 months ago. The instructions do leave a few things for figuring out. It's basically a "wire by number", but not all the wire numbers are in the instructions. You can figure it out by using some basic deduction, but it can be a little frustrating. In the end it took me only a day and everything turned out great. I would recommend that harness personally based on the low cost and end result.
Joined: Mar 2014
Posts: 154
'Bolter
'Bolter
Joined: Mar 2014
Posts: 154
If you decide to get it and have any questions, I can assist you.
Joined: Sep 2019
Posts: 56
Wrench Fetcher
Wrench Fetcher
Joined: Sep 2019
Posts: 56
Thanks Gregg, appreciate it...the price is what attracted me. Glad to know it worked for you. Planning to purchase Next week.
Joined: Jun 2011
Posts: 5,096
Crusing in the Passing Lane
Crusing in the Passing Lane
Joined: Jun 2011
Posts: 5,096
Don't forget, if one gets a 12 volt harness it will work fine on a 12 volt system, however, a 6 volt system requires thicker wires, so beware.
Joined: Sep 2019
Posts: 56
Wrench Fetcher
Wrench Fetcher
Joined: Sep 2019
Posts: 56
Thanks Ed, Good call out...going for just the original 6 volt replacement.
